FITTINGS

Pelican Hook and Chain Stopper

CCS LRS ABS BV approval

ͼƬ1.png

CHAIN SIZE		A (mm)	B (mm)	C (mm)	D (mm)	E (mm)	F (mm)	G (mm)	LOADS		WEIGHT
MM	INCHES	A (mm)	B (mm)	C (mm)	D (mm)	E (mm)	F (mm)	G (mm)	PL KN	BL KN	LBS
19	3/4	190	19	32	266	16	137	25	291	385	13
22	7/8	193	22	35	337	16	178	31	393	530	21
25-32	1 -1-1/4	219	29	41	446	19	260	39	731	986	41
32-38	1-1/4- 1-1/2	270	38	48	490	22	267	44	942	1271	50
35-41	1-3/8 - 1-5/8	270	38	48	490	22	267	51	942	1271	59
41-51	1-5/8 - 2	313	38	54	565	25	305	62	1122	1515	95
54-60	2-1/8 - 2-3/8	375	41	57	680	32	394	65	1122	1515	172
64-70	2-1/2 - 2-3/4	410	48	70	780	35	457	79	1567	2119	216
76-83	3 - 3-1/4	454	51	76	860	38	502	95	1817	2716	280
86-89	3-3/8 - 3-1/2	495	64	86	927	41	514	98	2191	3313	357
89-95	3-1/2- 3-3/4	568	73	108	997	44	533	114	3137	4746	440
121	4-3/4	568	73	108	1216	44	753	137	3137	4746	683

Hook Chain Stopper

DEVIL��S CLAW TYPE CHAIN STOPPER ASSEMBLY

΢��ͼƬ_20220701141442.png

Hi-Torque Chain Stopper

It was designed specifically for interval or end attachment. It will accommodate a wide range of chain, end link and various wire rope rigging applications. Since its introduction the Hi-Torque Chain Stopper has been regarded by supply vessel operators as the most proficient stopping device on the market for anchor handling, buoy retrieving and other applications.

Operationally, the Hi-Torque Chain Stopper is simple and effective. The closing lever pivots between the side plates to provide additional bending support while allowing the catch plate ample space for movement even when the stopper lies on its side. The shape of the side plates enables the stopper to lie flat on the deck in a closed or open position. There is no load on the deeper pin, which means it can be removed and the stopper can be tripped open with a tripping line attached to the catch plate.

This unique stopper is fabricated from hardened, high tensile alloy steel. Each stopper is proof tested in straight tension.